中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
HG/T 2875-2023 橡塑鞋微孔材料交联密度特征值试验方法(中英文版) Test method for characteristic value of cross-linking density of microporous materials in rubber and plastic shoes |
|||
GB/T 1927.15-2022 无疵小试样木材物理力学性质试验方法 第15部分:横纹抗拉强度测定(中英文版) Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 15: Determination of tensile strength across grains |
|||
GB/T 26957-2022 金属材料焊缝破坏性试验 十字接头和搭接接头拉伸试验方法(中英文版) Destructive testing of welds in metallic materials - Tensile test methods for cross joints and lap joints |
|||
GB/T 40128-2021 表面化学分析 原子力显微术 二硫化钼片层材料厚度测量方法(中英文版) Surface chemical analysis—Atomic force microscopy—Test method for thickness of the two-dimensional layered molybdenum disulfide nanosheets |
|||
GB/T 5095.2501-2021 电子设备用机电元件 基本试验规程及测量方法 第25-1部分:试验25a:串扰比(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-1: Test 25a: Crosstalk ratio |
|||
GB/T 39081-2020 电阻点焊及凸焊接头的十字拉伸试验方法(中英文版) Test method of cross tension test for resistance spot and embossed projection welds |
|||
GB/T 5095.2509-2020 电子设备用机电元件 基本试验规程及测量方法 第25-9部分:信号完整性试验 试验25i:外来串扰(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-9: Signal integrity tests-Test 25i: Alien crosstalk |
|||
FZ/T 50053-2020 再生纤维素纤维鉴别试验方法 着色后显微镜法(中英文版) Test method for identification of regenerated cellulose fibers - Microscopy after staining |
|||
GB/T 17737.122-2018 同轴通信电缆 第1-122部分:电气试验方法 同轴电缆间串音试验(中英文版) Coaxial communication cables—Part 1-122: Electrical test methods—Test for cross-talk between coaxial cables |
|||
GB/T 36422-2018 化学纤维 微观形貌及直径的测定 扫描电镜法(中英文版) Man-made fiber—Test method for micro morphology and diameter—Scanning electron microscope method |
|||
GB/T 36965-2018 光伏组件用乙烯—醋酸乙烯共聚物交联度测试方法-差示扫描量热法(中英文版) Test method for cross-linking degree of ethylene-vinyl acetate copolymer applied in photovoltaic modules—Differential scanning calorimetry(DSC) |
|||
GB/T 34018-2017 无损检测 超声显微检测方法(中英文版) Non-destructive testing—Test method for scanning ultrasonic microscopy |
|||
GB/T 33714-2017 纳米技术 纳米颗粒尺寸测量 原子力显微术(中英文版) Nanotechnology—Test method for size of nanoparticles—Atomic force microscopy |
|||
GB/T 32346.1-2015 额定电压220 kV(Um=252 kV)交联聚乙烯绝缘大长度交流海底电缆及附件 第1部分:试验方法和要求(中英文版) Long AC submarine cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)—Part 1: Test methods and requirements |
|||
GB/T 32189-2015 氮化镓单晶衬底表面粗糙度的原子力显微镜检验法(中英文版) Test method for surface roughness of GaN single crystal substrate by atomic force microscope |
|||
GB/T 18890.1-2015 额定电压220kV(Um=252 kV)交联聚乙烯绝缘电力电缆及其附件 第1部分:试验方法和要求(中英文版) Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)—Part 1: Test methods and requirements |
|||
GB/T 226-2015 钢的低倍组织及缺陷酸蚀检验法(中英文版) Test method for macrostructure and defect of steel by etching |
|||
GB/T 31541-2015 精细陶瓷界面拉伸和剪切粘结强度试验方法 十字交叉法(中英文版) Test method for interfacial bond strength of fine ceramic materials—Cross-bonded |
|||
GB/T 5594.8-2015 电子元器件结构陶瓷材料性能测试方法 第8部分:显微结构的测定方法(中英文版) Test methods for properties of structure ceramic used in electronic components and device—Part 8: Test method for microstructure |
|||
JC/T 2284-2014 空心玻璃微珠抗等静压强度(水压法)、吸油率及漂浮率的测定方法(中英文版) Test methods of isostatic compression strength (hydrostatic collapse strength), oil absorption and floatation ratio for hollow glass microspheres |
找到:42條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 |